Structural Steel Contractor ROC 329919 Glendale, AZ
comprehensive services
LICENSED STRUCTURAL STEEL AND ALUMINUM ERECTION
LICENSED STRUCTURAL STEEL AND ALUMINUM ERECTION
LICENSED STRUCTURAL STEEL AND ALUMINUM ERECTION
- Residential
- Commercial
- Industrial
- Licensed, Bonded, Insured
- ROC: CR-17 329919
STEEL FABRICATION
LICENSED STRUCTURAL STEEL AND ALUMINUM ERECTION
LICENSED STRUCTURAL STEEL AND ALUMINUM ERECTION
- Structural Steel
- Architectural Steel
- Miscellaneous and Custom Fabrication
- Production Welding and Fixturing
SHOP CAPABILITIES
- D1.1 Certified Structural Steel Welding.
- D1.4 Certified Structural Rebar Welding.
- Amada 8 Mark III w/ M6 High Column (cut capacity of 28"x18" at 90 degrees).
- 6'x12' CNC plasma (cut thicknesses up to 1 1/4" mild steel).
- 110 ton Iron Worker. (1 7/16" hole through 1" plate).
- 80"x240" fixture table for high precision fabrication and production we
- D1.1 Certified Structural Steel Welding.
- D1.4 Certified Structural Rebar Welding.
- Amada 8 Mark III w/ M6 High Column (cut capacity of 28"x18" at 90 degrees).
- 6'x12' CNC plasma (cut thicknesses up to 1 1/4" mild steel).
- 110 ton Iron Worker. (1 7/16" hole through 1" plate).
- 80"x240" fixture table for high precision fabrication and production welding.
- Rebar Bending up to #8 bar.
- Automatic stud welding.
- State of the art welding machines of all processes.
FIELD CAPABILITIES
- Licensed Structural Steel Erector.
- D1.1 Certified Structural Steel Welding.
- D1.4 Certified Structural Rebar Welding.
- Trained riggers and crane operator communication.
- Trained lifting and aerial lift operators.
- Bar joist installation.
- Onsite drilling and epoxy.
- Deck installation with HILTI PAF system.
- Onsite stud welding.
- Stellar 8621 Crane Truc
- Licensed Structural Steel Erector.
- D1.1 Certified Structural Steel Welding.
- D1.4 Certified Structural Rebar Welding.
- Trained riggers and crane operator communication.
- Trained lifting and aerial lift operators.
- Bar joist installation.
- Onsite drilling and epoxy.
- Deck installation with HILTI PAF system.
- Onsite stud welding.
- Stellar 8621 Crane Truck (8,600 lb. lifting capacity).
- All of our engine drive welders are equipped with LN25 wire feed systems with a deposition rate of 8-13lbs of wire per hour. Compared to stick welding at 3-5lbs. per hour.
- Onsite airless metal priming.